Muffle Furnace 04A-MFF100

Muffle Furnace is uniquely designed with optimum insulation properties and is ideal for ashing of food, plastic and other organic materials. With heating elements Fe-Cr-Al embedded into the brick walls, K type thermocouple and dual shell housing for low outer surface temperature, it is perfect for continuous working process at 950 °C.

Get Quote Download catalog
Max. Temperature 950 °C
Capacity 3 L
Heating Program Direct
Thermal Rate 5°C - 25°C / min
Heating Element Fe-Cr-Al
Program Memories 1
Thermocouple Type K Type
Heating Element Placement Embedded into brick walls
Inner Insulation Material Insulating Fire Brick
Front Face Insulation Material Ceramic Fibre Board
Door Insulation Material Ceramic Fibre Board
Housing Material Steel Sheet
Housing Coating Epoxy powder coating
Chimney Standard
Element Heating Element Protection Quartz Tube
Lockable Door Handle Sidewards
Temperature Control Accuracy ± 1 °C
Measurement Accuracy ± 1 °C
Power 1500 W
Max. Current 7A
Inner Volume Temperature Homogenity ± 10 °C
Inner Chamber Dimension (W x H x D) 130 x 105 x 230 mm
Product Outer Dimension (W x H x D) 336 x 434 x 533 mm
Gross Dimension (W x H x D) 420 x 620 x 620 mm
Net Weight 25 kg
Gross weight 35 kg
  • PID controller
  • New mono block body design
  • 7 segment display
  • Optimum insulation properties
  • Direct/ 2 step heating program
  • Fe-Cr-Al heating element embedded in brick walls
  • K-type thermocouple
  • Dual shell housing for low outer surface temperature
  • Ceramic fibre board as front face and door insulation material
  • Audio warnings as the step changes and at the end of the program
  • Provision of automatic power cut-off to the heating elements and alert if the control unit/ control card is over heated
  • User friendly

Sr. no. Accessory
1 High Temperature Gloves
2 Tongs
3 Alumina Crucibles
4 Metal Crucibles
5 Alumina Combustion Boats
6 Ceramic Pipes
7 Extra Thermocouple

It is used for applications such as: Fusing glass, Creating enamel coatings, Ceramics, Soldering, Brazing, Rubbers & Polymers.It is also used for metallurgical applications, for ash content determination and in research centers and medical laboratories to determine the volatile & non-combustible proportion of the sample.

Over Temperature Limiter
Gas Supply Connection
Observation Hole
PC connection
110 V power supply

Inner module: changing inner module renews your furnace close to a brand new furnace
Door Insulation: with sheet metal holder vessel
PCB: Easy to replace. Pre-programmed
Display card: 7 segment, 3 digit
Chimney Fan: 4 x 40 x 10 / 5 V fan

Recently Viewed Products