whatsapp

Muffle Furnace 04A-MFF1112

Muffle furnace is a microprocessor controlled furnace that is uniquely designed with optimum heat insulation properties and is ideal for ashing of food, plastic and other organic materials. With heating elements MoSi₂ (Molybdenum disilicide) vertically aligned next to the side walls, S and B type thermocouple, dual sheet housing for low outer surface temperature, it is perfect for continuous and maximum working temperature of 1750 °C. Having user friendly menu in 4 line display for easy operation and current limit control for safe operation, it is designed for minimal space requirement in the laboratory and is equipped with instantaneous energy consumption indicator, total working hour counter, control unit overheating sensor etc.

Max. Temperature 1750 °C
Capacity 30 L
Heating Program 4 step
Thermal Rate 3 °C - 20 °C
Heating element MoSi₂ (Molybdenum disilicide)
Program Memories 4
Thermocouple Type B Type
Display 4 x 20" LCD
Heating Element Placement Vertically aligned next to the side walls
Inner Insulation Material Ceramic Fibre Board
Front Face Insulation Material Insulating Fire Brick
Door Insulation Material Ceramic Fibre Board
Housing Material Steel Sheet
Housing Coating Epoxy powder coating
Chimney Standard without fan
Lockable Door Handle Sidewards
Temperature Control Accuracy ± 1°C (can vary at low temperatures)
Measurement Accuracy ± 1 °C
Inner Volume Temperature Homogenity ± 10 °C
Auto Start at Certain Date Yes
Show Remaining Waiting Time Yes
Skip the Waiting Step Yes
Burst Heating Mode Yes
Max. Current 3 x 27 A
Power 14.500 W
Inner Chamber Dimension (W x H x D) 250 x 310 x 390 mm
Product Outer Dimension (W x H x D) 602 x 1080 x 999 mm
Gross Dimension (W x H x D) 662 x 1140 x 1159 mm
Net Weight 185 kg
Gross weight 219 kg
  • PID controller
  • LCD display that shows current and target temperature
  • Optimum insulation properties
  • 4, 8, 16 step heating program availablev MoSi₂ heating elements vertically aligned next to the side walls
  • Accurate temperature measurement and control using S and B type thermocouple
  • Unique electronic design and software
  • Durable inside lining made of high quality light insulating bricks and ceramic fibre board
  • Dual shell housing for low outer surface temperature
  • Current limit control for safe operation
  • Provision of sound warning as the step changes and at the end of the program
  • Equipped with step indicator
  • Instantaneous energy consumption indicator
  • Step indicator
  • Total working hour counter
  • Descriptive error indicator
  • Control unit over heating sensor
  • Open door sensor
  • Provision of automatic power cutoff to the heating element if the control unit/ control card is over heated
  • User friendly operating menu

It is used for applications such as: Fusing glass, Creating enamel coatings, Ceramics, Soldering, Brazing, Rubbers & Polymers.It is also used for metallurgical applications, for ash content determination and in research centers and medical laboratories to determine the volatile & non-combustible proportion of the sample.

Over Temperature Limiter
Lift-up Door
Stainless Steel body
Gas Supply Connection
Open Door Sensor
Second Thermocouple
Observation Hole
PC Connection
110 V Power Supply

Inner Module: Changing inner module renews your furnace close to a brand new furnace
Door Insulation: With sheet metal holder vessel
Control Card: Easy-to-replace, pre-programmed
Power Card: Easy-to-replace
Display: 4 x 20 LCD display
Cooling Fan: 80 x 80 x 20/ 220 V fan
Chimney Fan: 40 x 40 x 10/ 5V fan

Recently Viewed Products