Conductivity measurement range |
1.0 to 199.9 µS/cm
|
Type of conductivity |
Low range conductivity
|
Conductivity accuracy |
± 1 % F.S.
|
Conductivity calibration points |
1 point
|
Conductivity calibration solutions |
146.5 µS/cm
|
Sensor type |
Platinum sensor
|
Temperature compensation |
0 °C - 50 °C
|
Temperature coefficient |
2 % per °C
|
Cell constant |
K=1
|
Normalization temperature |
25 °C
|
Data hold function |
Manual
|
Display |
LCD screen
|
Power off |
Manual or automatic (8 minutes after last key is pressed)
|
Power |
3 × 1.5 V “G134” batteries
|
Battery life |
Approximately 150 hours
|
Dimension (L*dia.) |
185 × 40 mm
|
Weight |
100 g
|
- ✔ Equipped with platinum sensor
- ✔
Low conductivity range
- ✔
1 point push button calibration to adjust the display value to known standard
- ✔
Auto hold function freezes stable, final readings for better viewing and recording
- ✔
Automatic temperature compensation for accurate measured value over the entire range
- ✔
Automatic power off helps to reduce battery power consumption
- ✔
Waterproof features guarantees protection against harsh conditions
- ✔
Replaceable electrode module to reduce the maintenance , replacement cost
146.5 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard solutions
G134 batteries
Carrying box
84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm conductivity standard solutions
Platinum conductivity electrode
Pocket Conductivity tester on the basis of its low, mid and high conductivity measurement range can be used for testing conductivity of pure water, drinking water , waste water, brine solutions and liquids.